3D Universe Presents: The Unofficial FlashForge Creator X Manual
shop3duniverse.com
Page 7 of 43
800-‐689-‐4344
The next step is to raise the build platform; there are two ways to do this:
1)
Turn the large threaded rod behind the rotating platform, or
2)
Grasp the printing platform with one hand on each side, raising it slowly and keeping it
level. Stop once the platform is just shy of the bronze nozzle.
Now you should be able to see underneath the build platform, you'll find the filament here; it’s
easiest to remove the filament by setting aside the remaining packaging material.
After that, cut off the ties between the X axis and front metal frame.
You have now finished un-‐boxing! The next task is to set up the hardware.
