3DTV Corp STEREODRIVER Model X
The Model X is meant to be used with wired LCD shutter glasses and
50hz (PAL, SECAM) or 60hz (NTSC) 3D field sequential (i.e., right/left
alternating) video and tube type (CRT) TV‘s. For higher frequency TV
or PC see our other products.
Connect a standard RCA audio or video cord from the composite VIDEO
OUT (a yellow RCA jack) of your VCR, VCD or DVD player, STB (set top
box--i.e., cable or satellite) to the provided RCA splitter and plug the
RCA from your TV video in into the RCA splitter. Plug the splitter into
the yellow RCA jack in the back of the Model X.
If using wired glasses, plug the stereo jack of the wired LCD shutter
glasses into the mini jack on the back of the Model. Up to 6 wired
glasses can be plugged in using standard stereo headphone splitter
plugs.
First time the unit is used you need to connect the 9V battery by
removing the battery cover in the back, connecting both leads, and
replacing the cover.
Turn on the power by pressing the left button(red light) and turn off
when finished viewing 3D. When you play the 3D program the red
light on the right side should be a steady red—if it blinks you must
check all connections. If the image is 3D (one image in each eye) but
looks strange, press the right side MODE button to reverse the eyes.
If you are using wired glasses and wish to sit further from the TV, you
may use a standard stereo headphone extension cord between the
StereoDriver and the glasses or RCA extension cords to the video
source and TV.
For European User’s
If there is no composite video out from your video source, but only a
Euro AV (SCART) connector then use a SCART to RCA breakout
