PANNORAMIC® DESK DW II 3.0.4
SCANNING MODES AND SETTINGS
MARCH 30, 2021
52
5.1.1
Profile settings panel
Objective settings
This field displays the objective used for scanning.
Notice:
There is no objective changer in Pannoramic® DESK DW II, therefore only one objective
type is displayed.
•
Objective type
o
20×
(
40×
if a 40× objective is used for scanning with Pannoramic® DESK DW II)
•
Output resolution
o
Fixed values are:
37× Native
for 20× objective, and
73× Native
for 40× objective.
o
Focus settings for the scan profile
Figure 35 – Focus settings for scan profile
•
Limits of the range
: You can define focus limits by defining the upper and lower limits by
selecting the desired value in the selection boxes. This is useful if focusing was not
targeted on the specimen, but on a spot on the coverslip.
•
Focus distance:
the distance of focal points can be set to create a focus map, based on
which the software calculates interpolated focus values (one step in distance means one
FOV).
•
Auto focus:
Focus value is set automatically to match sample characteristics.
•
Manual focus:
The manually set focus point coordinates are listed.
Set
and
Go to
options
are available on this panel too, and each point can be deleted by clicking
Remove
. Click
Clear points
to remove all the manual focus points.
