3devo Composer 35, Руководство пользователя

Страница: 27 / 42

23
After choosing and/or modifying your settings you may start the extrusion process
by choosing ‘Start extrusion’ in the Main menu. Material pre -sets can also be
loaded during the extrusion process.
4.9. SPOOLING – IDLE
The spooling menu is only used as status
menu at the moment the extruder is not
running. When the user has made a spool
using the spooling wizard before, the spooling
menu will still show the data from that time. It
is also possible to change the positioner settings when the machine is not yet
runn
ing in the ‘Positioner settings’ menu. More regarding the spooling settings in
the ‘Spooling – running section in chapter 8.10.
Note that if the machine has not been started with ‘Start extruding’, it will home the
positioner first before continuing with the selected preview position.