3D Systems SLA 750 Series Скачать руководство пользователя страница 61

Страница: 61 / 101

DNS Server 1 - the internet's system for converting alphabetic names into numeric IP addresses. For display only. This

number cannot be changed through this interface.

DNS Server 2 - the internet's system for converting alphabetic names into numeric IP addresses. For display only. This

number cannot be changed through this interface.

Apply Button - Tap this button to keep all your changes and go back to the Settings home screen.

7.3 Installing 3D Sprint

3D Sprint

™

is the 3D Systems' software application used for preparing CAD models

to be printed on an SLA printer. It is installed on a standalone computer which is

provided by the customer. Double-click the 3D Sprint icon on your computer/ laptop,

or select it from your list of available programs loaded on your computer. For detailed

information on the features of 3D Sprint, as well as help for part preparation, you can

access the full help document by clicking on the question mark icon inside the 3D

Sprint software.

Note: If you do not have 3D Sprint loaded on your computer you can obtain a copy by clicking

here.

7.4 3D Sprint

1. Open 3D Sprint Software and select Print (1).
2. Select Configuration (2).
3. Select printer from Network/USB Printers list (3).

1. Select Installed Material from list (4).

3D Systems, Inc.

p/n 40-D150, Rev. C

Содержание SLA 750 Series






































































































Результаты поиска

Содержание SLA 750 Series

Отзывы:

3D Systems SLA 750 Series, Руководство пользователя, Страница: 61 / 101

Результаты поиска

Содержание SLA 750 Series

Отзывы: