3D Systems ProX DMP 300 Скачать руководство пользователя страница 54

Страница: 54 / 102

3D SYSTEMS, INC

PN:80-D27 Rev.B

Machine Status menu

This menu displays a global view of the status of the

printer . It consists of 4 parts .

PREPARATION

Summary of operations of machine preparation,

•

Green light = process complete

•

No light = process not complete

HARDWARE

Status of components (Green light = OK, Red light =

fault)

•

Supply

: indicates the status of various power supplies of the machine: compressed air supply, gas supply, and

power supply,

•

Oxygen sensor

: indicates the status of the oxygen sensor (low/high alarm),

•

Safety

: includes all the safety of the machine and interlocks states (open, locked) that can block a movement or a

manufacturing start,

•

Laser

: indicates the type of laser, and its state,

•

Scanner head

: state of the thermo-couples, and the temperature values,

•

Axes

: indicates the state of the 2 drivers, of the 4 motors, and the corresponding error code .

FILTERS TIMERS

This area indicates the following information (in this order) for the Lens Cleaner filter, Recycling filter and Vacuum filter:

•

Status of the filter operating hours:

•

Green light: operating hours < 90% of the recommanded filter replacement

•

Orange light (caution): operating hours > 90% and < 100% of the recommanded filter replacement

•

Red light (warning): operating hours > 100% of the recommanded filter replacement

•

Value of the current operating hours

Each timer can be reset by clicking on the "Reset" corresponding button, to be done after filter replacement.

WARNING TOOLTIP (encircled number)

Displayed only if one of the followings occures . It indicates the number of:
•

orange lights activated of the filter timers: the corresponding number is displayed with orange background.

•

red lights activated of the filter timers or any sensor fault: the corresponding total number is displayed with red back

ground .

If both colors occur, the red one is only displayed .
If none of them occur, the tooltip is not displayed .

Содержание ProX DMP 300






































































































Результаты поиска

Содержание ProX DMP 300

Отзывы:

3D Systems ProX DMP 300, Руководство пользователя, Страница: 54 / 102

Результаты поиска

Содержание ProX DMP 300

Отзывы: