3D Systems ProX DMP 100, Руководство пользователя, Страница: 39 / 83

35 3D SYSTEMS, INC . PN:80-D48 REV A
Step 1 : Initialization
For each new job preparation, the printer must be initialized at first. The Initialization step is performed automatically:
1 . Click on the automatic cycle launch button (1) .
2 . When automatic cycle completed, click on
Next (2) to go to the next step .
Step 2 : Plate unloading
The Plate unloading step includes both automatic and manual actions . When automatic actions have been done, manual
actions are required .
1 . Click on the Start button (1): this will launch the
automatic cycle .
2 . When the automatic cycle is completed, then
perform the actions (2) by using the available
commands (3) and the external control panel .
Consult the section "Unloading a plate" on page
55 for details .
3 . When manual actions completed, click on Next (4)
to go to the next step .
1
2
1
3
2
4