manualshive.com logo in svg

3D Systems PostCure 1050, Руководство пользователя, Страница: 31 / 68

Поделиться
Скачать
3D Systems PostCure 1050 Скачать руководство пользователя страница 31

6.1.3  PostCure 1050 Settings

A

Home - Tap to return to settings home.

B

Network - Opens the Network Settings screen.

There, you can change settings for your Network

and toggle 3D Connect on/off.

C

Device Info - Opens the Device Info screen. There,

you can change the device name, as well as view

machine information. You will most-often use this

to look up the firmware version and machine IP

address.

D

Usage - Opens the machine Usage screen. There,

you can view data such as total curing time, print

job data, and number of calibrations performed.

E

Fault Log - Opens the Fault Logs screen. There, you

can view a record of errors that have occurred.

F

Maintenance - Opens the maintenance screen.

There, you can load system updates and export

logs to usb.

G

About UI - Opens the About UI screen. This is a

read-only screen with information about the touch

screen/firmware.

H

Language - Select your language from a limited list

I

Date and Time - Shows date/time (see below)

J

Set Clock - Toggle automatic date/time (NTP) on/

off. If turned off, you can manually set the date,

time, and time zone.

6.1.3.1  PostCure 1050 Network Settings
On this screen, you can toggle 3D Connect on/off. You can also tap Change Network Settings to see the screen below.

Note: NOTE: There must be an ethernet cable plugged in before accessing the Change Network Settings Menu.

3D Systems, Inc.

28

p/n 40-D177, Rev. A

Содержание PostCure 1050





































































Отзывы:

Нет отзывов