3Com VCX V7000 Скачать руководство пользователя

Страница: 427 / 488

Replacing a Disk (Single Site)

425

Instructions

(Single Site,

Two Servers)

Use the appropriate instructions from this section to replace the disk on
the Primary or Secondary VCX Server and bring the server back into
service.

If this server is configured for RAID operation, see

“RAID Disk Failure”

earlier in this appendix.

Replace the failed disk and start the server.

Remove power from the down server.

Remove the failed disk.

Install the replacement disk.

Reapply power to the server.

Press the start button on the front panel.

After the server has started and the login prompt appears, log in as

root

and configure networking parameters on the down server by entering
this command:

vcx-config-network --wizard

If the down server is the primary VCX server, follow the instructions in

“Configuring a Primary IP Telephony and Messaging Server”

Chapter 2

If the down server is the secondary VCX server, follow the instructions in

“Configuring a Secondary IP Telephony and Messaging Server”

Chapter 2

If necessary, upgrade the software on the down server to match the
software version on the partner server.

Compare the software version on the down server to the software
version on the running server.

On the running server and on the down server, enter this command:

vcx-showversion

If the down server is running an earlier software version than the
running server, download the appropriate software upgrade file to the

/opt/installtemp

directory on the down server.

The location of the software upgrade file depends on 3Com’s service
delivery methods and on the customer network configuration.

Software upgrade file names begin with the software version and end in
a

.tar

extension (for example: vcx-all-6.0.2c.tar). The examples in this

section assume that you need to upgrade to VCX 6.0.2c.

Содержание VCX V7000









































































































































































































































































































































































































































































































Результаты поиска

Содержание VCX V7000

Отзывы:

Похожие инструкции для VCX V7000

Бренды по названию

Популярные бренды

3Com VCX V7000, Руководство по установке

Результаты поиска

Содержание VCX V7000

Отзывы:

Похожие инструкции для VCX V7000

Бренды по названию

Популярные бренды