3Com VCX V7000, Руководство по установке

Страница: 151 / 488

151
Configuring an IP Telephony Server at a Branch Office
Before you install a branch office IP Telephony server, you must modify
the regional office firewall software to permit traffice from the branch
office server. Log in to the Authentication and Directory (Data) server in
the regional office and enter this command for each branch office server
that you install:
modfw -p oracle allow <IP address of branch office server>
Before you install a branch office IP Telephony server, you must also set up
a database schema on the regional office Authentication and Directory
server. This schema acts as a replica of the branch office server’s database
schema and must be set up prior to the installation of the branch office
server.
CAUTION: If you previously tried to set up a branch office IP Telephony
server without first setting up the replica database on the regional office
Authentication and Directory server, you may have to drop database
replication by logging in on the regional Authentication and Directory
server as cworks and entering these commands:
cd /opt/3com/VCX/vcxdata/bin
./dropReplication
To set up a branch office schema on the regional Authentication and
Directory server:
1 Log in on the regional Authentication and Directory (Data) server as
cworks and enter these commands:
cd /opt/3com/VCX/vcxdata/bin
./installVcxdata
2 Select option 1 - Create a Backup Database Schema for a Branch Office.
3 When the script prompts you, enter the Site ID for the branch office.
Site IDs can contain only the characters A-Z, a-z, and 0-9.
4 When the script prompts you, enter the Site Name for the branch office.
When you install the branch office server, use this site name. Site names
can be up to 22 characters long and can contain only the characters A-Z,
a-z, and 0-9. No punctuation characters, spaces, or tabs may be used.
5 When the script prompts you with this question, enter y.
Do you want to continue with the above settings ? [n/y]: