3Com VCX V7000, Руководство по установке и обслуживанию

Страница: 51 / 144

Installation Scripts 51
Call Processor and SIP Downloader Installation Scripts —
Secondary Server (continued)
n
Would you like to change anything in the configuration before exiting? (y/n)
n
Finished the 3Com Call Processor configuration
Please choose from the following network interfaces to configure your SIP
downloader: eth0 eth1
enter interface name > eth1
Is the IP Address for eth1 10.20.30.43? [y]:
Initial VCX configuration completed successfully.
End of Call Processor and SIP Downloader Installation Scripts —
Secondary Server
Enabling Database Replication Between VCX Servers
To enable database replication between the primary and secondary VCX
servers, configure both servers to the point where all script questions
have been answered.
To enable database replication, follow these steps:
1 Stop the auth application on both servers.
On the primary VCX server and the secondary VCX server enter these
commands:
cd /opt/3com/VCX/auth/bin
./auth stop
2 Stop the dir application on both servers.
On the primary VCX server and the secondary VCX server enter these
commands:
cd /opt/3com/VCX/dir/bin
./dir stop
3 Stop the tomcat application on both servers.
On the primary VCX server and the secondary VCX server enter these
commands:
su - tomcat
cd $CATALINA_HOME/bin
./shutdown.sh
exit