3Com Switch 4800G PWR 24-Port, Руководство по настройке

Страница: 147 / 730

1-4
Security mode Description Feature
macAddressElseUs
erLoginSecure
In this mode, a port performs MAC
authentication of an access user first. If the
authentication succeeds, the user is
authenticated. Otherwise, the port performs
802.1x authentication of the user.
In this mode, there can be only one
802.1x-authenticated user on the port, but
there can be several MAC-authenticated
users.
macAddressElseUs
erLoginSecureExt
This mode is similar to the
macAddressElseUserLoginSecure mode,
except that there can be more than one
802.1x-authenticated user on the port.
macAddressAndUs
erLoginSecure
In this mode, a port firstly performs MAC
authentication for a user and then performs
802.1x authentication for the user if the user
passes MAC authentication. The user can
access the network after passing the two
authentications.
In this mode, up to one user can access the
network.
macAddressAndUs
erLoginSecureExt
This mode is similar to the
macAddressAndUserLoginSecure mode,
except that more than one user can access
the network.
z
When the port operates in the userlogin-withoui mode, Intrusion Protection will not be triggered
even if the OUI address does not match.
z
On a port operating in either the macAddressElseUserLoginSecure mode or the
macAddressElseUserLoginSecureExt mode, Intrusion Protection is triggered only after both
MAC-based authentication and 802.1x authentication on the same packet fail.
Port Security Configuration Task List
Complete the following tasks to configure port security:
Task Remarks
Enabling Port Security Required
Setting the Maximum Number of MAC Addresses Allowed on a
Port
Optional
Setting the Port Security Mode Required
Configuring the NTK feature
Configuring intrusion protection
Configuring Port
Security
Features
Configuring the Trap feature
Optional
Choose one or more features
as required.