3Com SuperStack II Switch 3300, Руководство пользователя

Страница: 15 / 64

Switch 3300 FX — Rear View Detail 15
Switch 3300 FX —
Rear View Detail
Figure 2 Switch 3300 FX — rear view
Unit Information
Label
This label shows the following:
■
The 3Com product name of the Switch
■
The 3Com 3C number of the Switch
■
The unique MAC address (Ethernet address) of the Switch
■
The serial number of the Switch
You may need this information for fault reporting purposes.
Power Socket The Switch automatically adjusts its power setting to any supply voltage
in the range 90–240V A.C.
Redundant Power
System Socket
To protect against internal power supply failure, you can use this socket
to connect a SuperStack II Advanced Redundant Power System (RPS) to
the Switch. See
“Connecting a Redundant Power System” on page 29 .
Console Port The console port allows you to connect a terminal and perform remote or
local out-of-band management. The console port uses standard null
modem cable and is set to auto-baud, 8 data bits, no parity and 1 stop
bit.
16982ug1.bk Page 15 Thursday, April 29, 1999 4:51 PM