3Com SuperStack II Switch 3000 10/100, Руководство пользователя

Страница: 21 / 150

Quick Start For SNMP Users 1-13
Entering an IP Address for the Switch
1
Connect a terminal to the console port of the
Switch 3000 10/100, refer to
“Connecting a VT100
Terminal” on page 2-7 . The terminal should be con-
figured to 9600 line speed (baud rate), 8 data bits,
no parity and 1 stop bit.
2
Press [Return] one or more times until the Main
Banner screen appears.
3
At the Main Banner screen, press [Return] to dis-
play the Logon screen. Log on using the default
user name
admin (no password is required) . Select
OK.
4
The Main Menu is displayed. From this menu, select
the MANAGEMENT SETUP option. The Switch Man-
agement Setup screen is displayed.
5
On the Management Setup screen, fill in the follow-
ing fields:
■
Device IP Address
■
Device SubNet Mask (if necessary)
■
Default Router (if necessary)
For further information on the Management Setup
screen, refer to
“Setting Up the Switch for Manage-
ment” on page 3-6 .
6
If you need the Switch 3000 10/100 to send SNMP
traps to the Network Manager, you may need to set
up the address of the Network Manager in the Trap
Table. Refer to
“Setting Up Traps” on page 4-25 .
3Com Network Managers such as Transcend Work-
Group Manager for Windows may automatically
configure the Switch 3000 10/100 to send traps to
them. Please read the documentation supplied with
your network management software.
7
When you have finished with the Management
Setup screen, select OK.