********************************************************************
[12345]127.127.1.0 LOCAL(0) 7 26 64 1 0.0 0.0 15.6
[5]10.110.101.20 0.0.0.0 16 - 64 0 0.0 0.0 0.0
note: 1 source(master),2 source(peer),3 selected,4 candidate,5 configured
4.3 display ntp-service status
Syntax
display ntp-service status
View
All views
Parameter
None
Description
Using the
display ntp-service status
command, you can display the state
information of the NTP service.
Example
Display the state information of the NTP service.
[3Com]
display ntp-service status
clock status: synchronized, stratum: 4, reference clock ID: 131.108.13.57
nominal freq: 250.0000 Hz, actual freq: 249.9990 Hz, precision: 2**19
offset: 7.33 ms, reftime: 00:10:22.438 PDT Mon Jul 5 2003 (AFE2525E.70597B34)
root delay : 133.36 ms, root disper: 126.28 ms, peer disper: 5.98 ms
The following table gives the explanation to the displayed information.
Table 4-1 Description of the state information of the NTP server
Item
Description
synchronized
The local system is synchronized with a remote NTP server or some clock
source.
unsynchronized
The local system is not synchronized with any remote NTP server.
stratum
The NTP stratum level at which the local system is operating.
reference
Specify the address of the remote server or ID of the clock source with which
the local system has synchronized.
nominal freq
The nominal frequency of the hardware clock maintained by the local system
actual freq
The real frequency of the hardware clock maintained by the local system
precision
Precision of the local system clock
reftime Reference
timestamp
offset
The offset of the local clock relative to the NTP server
3Com Router Command Reference Guide Addendum for V1.2
69