background image

3

H

ARDWARE

 D

ESCRIPTION

 

AND

 

I

NSTALLATION

Package Contents

The ISDN LAN Modem package includes: 

OfficeConnect ISDN LAN Modem

Power cable with an AC wall transformer

RJ -11 ISDN telephone cable

10BASE-T Ethernet cable

3Com Companion Programs

 CD-ROM 

OfficeConnect ISDN LAN Modem Getting Started Guide

Rubber feet and stacking clips

Before You Install the 
ISDN LAN Modem

To install, configure and use the ISDN LAN Modem successfully, you must have the 
following:

Correct ISDN service installed at your location with an available ISDN RJ-11 or 
RJ-45 outlet. If you have not yet ordered ISDN service, refer to Appendix E.

A JavaScript-enabled and frames-capable Web browser. A Web browser is 
provided on the 

3Com Companion Programs

 CD-ROM. (For more information 

refer to Appendix B.) If you use a different Web browser, make sure that it 
supports frames such as Netscape 2.1 and later and Internet Explorer 3.0 and 
later.

If you already have a version of the Internet Explorer Web browser installed and 
would like to install a later version, you should first uninstall the previous version. 
If you are asked to replace the older files, it is recommended that you do so.

A personal computer with TCP/IP and Ethernet connectivity that meets UL 
standards in the United States or is certified to CSA standards in Canada. 

For a PC, a 386 or higher processor is recommended and a 10BASE-T 
Ethernet card is required. 

For an Apple Macintosh computer, system 7.6 or later operating system and 
Open Transport (provided as part of system 7.5). Built-in Ethernet 
connectivity is provided through an Apple Ethernet port in all Power 
Macintosh computers. 

TCP/IP is provided as part of the Windows 98, 95, NT and Macintosh System 
7.6 and later operating systems. For Windows 3.11 users, TCP/IP software is 
provided on the 

3Com Companion Programs

 CD-ROM.

You do not have to have available storage space on your computer’s hard drive 
because nothing is copied as part of the ISDN LAN Modem installation. If you 
want to copy any programs or documents from the CD-ROMs, ensure that you 
have available hard disk space.

Содержание OfficeConnect Series


































































































































Отзывы: