3Com CoreBuilder 9000, Руководство пользователя

Страница: 249 / 468

LECS ELAN Database Operations 249
Update ELAN
Parameters in LECS
Database
Update the parameters for the specified ELAN in the LECS database. (For
more information, see Table 30 for a description of the ELAN parameters
that you can update.)
CAUTION: After you update the parameters of an ELAN in the LECS
database, you must use the LMA to update the parameters of the ELAN
in the LES database in exactly the same way. (For more information, see
“Update ELAN Parameters in LES Database” on page 281.)
Command Actions
Command Result
Example
Enter:
2 1 5 3 elan69_14 1 1
The following prompt appears:
elan type is 1, max frame size is: 1
Are you sure (y/n): y
Enter
Y
to confirm,
N
to cancel reset. The parameters of the ELAN
elan69_14 are updated.
Enter menu sequence:
(2) LEM: LAN Emulation
(1) LCS: LE Configuration Services
(5) LNT: LECS Network topology
(3) EET: Edit ELAN type & params
Enter a parameter at the prompt
Parameter Format or Range
ELAN name Up to 32 characters. (For more information, see
“Display ELANs” on page 245.)
ELAN type
1
– Ethernet
2
– Token ring
3
– VLT
ELAN max frame size
1
– 1516
2
– 4544
Direct access sequence:
2 1 5 3
[parameters]
System action taken: The parameters for the specified ELAN are updated.
The update takes place immediately.
System message display:
elan type is <n>, max frame size is
<n>: