3Com CoreBuilder 9000, Руководство пользователя

Страница: 151 / 468

Network Prefix 151
Reset Network Prefix
Configuration
Reset the network prefix configuration parameters for the
CoreBuilder 9000 ATM Enterprise Switch to their factory default settings.
The default setting is 47.00.00.00.00.00.3c.00.60.9*.
The reset takes place after the next reboot.
Command Actions
Command Result
Example
Enter:
1 1 6 3
The following prompt is displayed:
Do you really want to reset config [y/n]?
Enter
y
to confirm. The following message is displayed:
Network prefix configuration was set to defaults.
The network prefix configuration parameters are reset to their factory
values.
Enter the menu sequence:
(1) SYS: Platform Configuration
(1) SET: Switch Setup
(6) SNP: Switch Network Prefix Setup
(3) RNP: Set Network Prefix to
Factory Defaults
Direct access sequence:
1 1 6 3
System action taken: The network prefix configuration parameters are reset
to their factory default values.
System message display:
Network prefix configuration was set to
defaults.