3Com CoreBuilder 3500, Руководство по внедрению, Страница: 496 / 592

496 C
HAPTER
17: Q
O
S
AND
RSVP
■
Days of the week use the following syntax:
1-7
(Monday=1, Tuesday=2, Wednesday=3, Thursday=4, Friday=5,
Saturday=6, Sunday=7). For example, to enter Monday as the day of
the week, you would type: 1
■
You can check the timer control options using the “qos control detail”
command. The detail displays the type of time control, the start and
end times, and the classifiers associated with the control.
The time is checked every minute.
Timer Options
The following options are available for the timer control:
■
Specific Day — Select the specific start day and time, and the specific
end day and time. The control is removed once the end time is
reached.
■
Daily
— Select a starting day and then a start and end time. The
control is activated between the start and end time everyday.
■
Day of the Week
— Select a day and then a start and end time. The
control is removed once the end time is reached.
■
Every Day of the Week
— Select a start day and then the start time
and end time. The control is activated between the start and end
times every 7 days.
■
Every Day This Week — Select start and end time. The control is
activated every weekday between the start and end times for the
current week.
■
Every Day This Weekend — Select a start and end time. The control
is activated during each day of the current weekend and is removed
once the Sunday end time is reached.
■
Every Week Day — Select a start and end time. The control is
activated between the start and end times every weekday.
■
Every Weekend — Select a start and end time. The control is
activated on each weekend day between the start and end times.