3-16
C
HAPTER
3: W
INDOWS
NT D
RIVER
I
NSTALLATION
5
Select an ELAN name and then click
Configure ELAN
.
The ELAN Configuration window appears, as shown in
Figure 3-9.
Figure 3-9
ELAN Configuration Window
a
Enter the ELAN name.
The ELAN names should match the ELAN names configured
on the ATM switch, LECS, or LES. In many ATM installations
the ELAN name is supplied by the LES.
b
Select the LE configuration mode.
■
Select
Automatic using ILMI
to use the ATM switch-based
Interim Local Management Interface service (ILMI) to
connect to the LES.
■
Select
Automatic with specific LECS
if you wish to contact
an LECS not identified by ILMI. Enter the 20-byte ATM
address of the specific LECS if it does not use the default
ATM Forum Well-known Address. To reinstate the default
value, click the
Well-known LECS Address
button.
■
Select
Manual with specific LES
to connect directly to the
LES
.
Enter the 20-byte ATM address of the LES.