Changing Software Option Settings
3-11
10 If you are working in an EISA computer, remove the
adapter from the computer and install it in the ISA
computer. Follow the instructions given in Chapter 2,
"Installing the Adapter."
Changing Software Option Settings
You should change the default settings o f an EtherLink III
adapter only if a conflict with another device or card exists.
For information on settings of other standard devices, select
the Configuration/Diagnostic/Troubleshooting option on the
EtherDisk
diskette main menu.
The default settings can also be changed in the following
situations:
■ You have a boot PROM.
■ You are using a modem faster than 9600 baud.
* You want to optimize driver performance for OS/2® or
Windows or for operation on a server.
■ You want to deactivate the Auto Select Media Type option.
(Select this option if you are unsure of the media connection
to your adapter.)
■ You want to change the type of network connector.
■ You want to disable Plug and Play.
Table 3-1 lists each software option, the default setting, and
the available settings. Refer to the on-line help (using [FI]
when the option is highlighted) for more information about
each setting.