manualshive.com logo in svg

3Com 3C10111C - NBX 100 - Modular Exp Base, Руководство по установке, Страница: 88 / 210

Поделиться
Скачать
3Com 3C10111C - NBX 100 - Modular Exp Base Скачать руководство пользователя страница 88

88

C

HAPTER

 2: I

NSTALLING

 S

YSTEM

 H

ARDWARE

 C

OMPONENTS

Connecting a 3Com

Attendant Console

The optional 3Com Attendant Console provides attendant (receptionist) 
access and monitoring for up to 100 extensions per console.

Do not Auto Discover the Attendant Console before you have Auto 
Discovered telephones and Analog Line Cards. For more information 
about Auto Discover, see 

“Using Auto Discover for Initial System 

Configuration”

 on 

page 91

.

To connect a 3Com Attendant Console:

1

Connect the power source to the Attendant Console.

For information about connecting power to an Attendant Console, see 
the packing sheet that ships with the device or 

“Connecting Power to the 

Attendant Console”

 on 

page 113

.

2

Connect the Attendant Console to the LAN switch port located on the 
underside of the 3Com telephone.

You can also connect the Attendant Console to the LAN. It does not need 
to be connected directly to a telephone.

Power over 
Ethernet 
(IEEE 802.3af) 
power source

3C10400

Connect the powered Ethernet cable directly to the telephone’s Ethernet 
connector. No separate power connection is required.

3C10120B

Devices that predate the 802.3af standard can be 
powered by an 802.3af-compliant power supply with 
the use of the 

3Com Network Jack to NBX Phone 

Power Module

 (3CNJVOIPMOD-NBX), which is 

802.3af-compliant. The module removes power from a 
powered Ethernet cable and splits it into a power jack 
and an unpowered Ethernet connection that you 
connect to the ATA’s LAN port and power connection.

3Com Ethernet 
Power Source:

■

3C10220 
(12-port)

■

3C10222 
(24-port)

3C10400
3C10120B

The 3Com Ethernet Power Source predates the 802.3af standard. 
Any NBX device can be powered by a 3Com Ethernet Power 
Source if you use and NBX Power Splitter (3C10223 – package of 
12). The NBX Power Splitter removes power from a powered 
Ethernet cable and splits it into a power jack and an unpowered 
Ethernet connection that you connect to the ATA’s LAN port and 
power connection.

CAUTION:

 You can damage an NBX device by using an NBX power splitter (3C10223) with the 3Com Network 

Jack Power over Ethernet Multiport Midspan Solution (3CNJPSE24). Use the NBX power splitter (3C10223) only 
with the 3Com Ethernet Power Source (3C10220, 12-port, or 3C10222, 24-port).

Table 11   

Connecting Power to an NBX Analog Terminal Adapter (continued)

Power Source NBX ATA Model Connection Details

3CNJVOIPMOD-NBX

3C10223

Содержание 3C10111C - NBX 100 - Modular Exp Base



















































































































































































































Отзывы:

Нет отзывов