3B SCIENTIFIC® PHYSICS
1
Stefan-Boltzmann Lamp 1008523
Instruction manual
02/24 NF/ALF/UD
1. Safety instructions
The Stefan-Boltzmann lamp conforms to the
safety stipulations for electrical measuring, con-
trol and laboratory instruments as specified in
DIN EN 61010 part 1. It is intended for use in
dry rooms suitable for the operation of electrical
equipment.
Safe operation of the equipment can be assured
as long as it is used as stipulated. However,
safety cannot be guaranteed if the equipment is
used incorrectly or handled without due care
and attention.
Caution:
When in operation, the lamp can be-
come very hot. There is then a risk of burns if it
is touched. This can also result in greasy resi-
dues being burned onto the lamp.
Do not touch the lamp with your fingers.
Allow the lamp to cool after the experiment
has been completed.
Note:
Applying a voltage of more than 13 V to the ter-
minals is likely to destroy the filament.
Never apply a voltage higher than 13 V
across the two 4-mm sockets.
