Eclipse HD SS v2.1.22
Page 12
© 360 Vision Technology Ltd.
RTSP URL
• Copy - Use this option to copy the RTSP URL
•
Date Position - Choose date text to bottom right or left of the image.
•
Time Position - Choose time text to bottom right or left of the image.
•
Show Sub-stream - Shows second sub-stream if enabled.
OK
to program the new settings into the Eclipse HD.
Cancel
to abandon the changes to the video settings.
5.2.2 Video Advanced
Multicast -
(See Stream Tables - page 27).
Tick the box to enable ‘multicast’. If the box is not ticked then ‘unicast’ is selected.
• Multicast Stream 1 - Set IP address and port for stream 1.
• Multicast Stream 2 - Set IP address and port for stream 2.
Concurrent Uni/Multicast - Enable to allow concurrent unicast/multicast streams.
Note: Unicast - rtsp://ipaddress:554/h264main and Multicast - rtsp://ipaddress:8554/h264main
RTSP protocols allow ‘multicast’ or ‘unicast’ transmission. In addition to the ‘multicast’ feature being available on
the Eclipse HD, the ‘multicast’ feature must also be available on the receiving device.
Unicast
If lots of receivers (users) want to receive video streams from the Eclipse HD, each receiver will have a
separate video stream. This would increase the network bandwidth used. E.g. five users would require five
video streams, that typically will require five times the bandwidth.
