Add Computers to the Network
13
Wireless Connection
Requires a computer with an 802.11b/g wireless network adapter installed. Wireless adapters are
purchased separately from the 2Wire gateway.
Figure 6. Gateway Connected to Second Computer Via Wireless
1.
Install your wireless adapter according to the manufacturer’s instructions (see note above).
2.
Repeat “Run the 2Wire Setup Wizard” on page 9.
Note:
If you use a 2Wire wireless adapter (PCI, PC card, or USB adapter) for wireless
networking, the gateway installation software automatically configures it to communicate
with the gateway during setup.
If you are
NOT
using a 2Wire wireless adapter, you must manually configure your adapter to
communicate with the gateway using the information on page 6.
DSL
PH
ONE LINES
PO
W
ER
RESET
2
AC power
2Wire
DSL filter
Telephone wall jack
with DSL
Computer
(with 802.11g wireless
adapter installed)
Gateway 2701
DRAFT ONLY
2Wire Confidential
