5. MALFUNCTIONS
5.1 MALFUNCTIONS
Disconnect the main power supply before any intervention to the unit. If you are not sure of the correct steps, do not
attempt to perform any repairs and call a professional service!
Unit behaviour
Likely problem
Solution
Unit’s not working
Power supply interrupted
Check that the power supply is not interrupted
Cracked fuse
Check the fuse in side the control module
The heating switches off
automatically
The heater overheats
The heater overheats due to insufficient air flow. Check
that the ventilators are in good order and that the air
supply is not disrupted.
ATTENTION!
Switch off the main power supply before any intervention inside the unit. Let the unit cool!
6. MAINTENANCE
6.1 CLEANING
ATTENTION!
•
Do not use compressed air, chemicals, solvents or water to clean the unit.
•
Use a soft brush or a vacuum cleaner to clean the suction cover and the inside of the unit.
•
See the installation manual of the ESSENSSE NEO curtain
7. SERVICE
7.1 IF YOU ARE UNABLE TO REPAIR THE UNIT
If you were unable to solve a problem, contact the supplier or the representative of 2VV. Warranty and post-warranty service are
provided by the supplier or an authorised service included in the list available at the supplier’s.
Give the following information to the supplier or service:
– type designation of the air curtain
– accessories in use
– place of installation
- serial number
– conditions of the installation (incl. electrical)
– period of operation
– detailed description of the malfunction
7.2 – DECOMMISSIONING THE PRODUCT – LIQUIDATOIN
Before scrapping the product, make it unusable. Old products still have raw materials that can be reused. Take them to a collection
centre for secondary raw materials. It is preferable to have the product liquidated by a specialist so that the recyclable materials
may be reused. Take the unusable parts to an appropriate waste disposal site.
The liquidation of materials must observe the applicable waste management regulations.
