2T Technology Voyager Voice Sleek, Инструкция по установке и эксплуатации

Страница: 8 / 28

8
So that the unit can send itself a text message to synchronise the time of
day it needs to know its own phone number.
A) Get the telephone number from the SIM card that you have taken
the SIM for the unit from.
B) Program this into the GSM device as follows.
Send this text. Receive This Text Response
SIM set xxxxxxxxx SIM Phone number
xxxxxxxxx Programmed.
*xxxxxxx represents the GSM device’s mobile number eg:0872376605
6. Check Reception levels
Initial installation is now complete. Use the SMS text command below to
confirm signal level is acceptable for the GSM device.
Send this text. Receive This Text Response
Diag Levels See table for response
explanation
Example Response Meaning
VV-IKL
VV-IKL = Voyager Voice Integrated Keypad
with LEDs
57 SW version 5.7
Signal Level XX
The Current Signal Level
For 2G operation:
this number needs to be 10 or higher.
For 3G Operation:
this number needs to be 8 or higher.
Mode is XG
Current mode of operation
2G = 2G Mode 3G = 3G Mode
SIM Number
This is the GSM device’s own phone number.
( Set with the “SIM set xxxxx” command )