2N Netstar Скачать руководство пользователя страница 51

Страница: 51 / 282

3.5 GSM

The

menu provides a list of all GSM virtual ports of the PBX. The

Virtual ports – GSM

parameters are divided into logical sections.

Basic

Stack status

This field displays information on the stack and its current status.

Network selection

Net type selection

– select the preferred network for module login. The

following options are available:

Any
Only GSM
Prefer GSM
Only UMTS
Prefer UMTS

Roaming enabled

– use this option to enable roaming for a GSM virtual port.

Manual network selection

– if not checked, the SIM card tries to log into the

preferred network automatically. If checked, enter the correct

Network code

make the SIM card log into the selected network only. If the selected network is
unreachable, the SIM card will not try to log into another network.

Network code

– fill in a 5–digit international network code (e.g. T–mobile

CZ=23001, O2 CZ=23002, Vodafone CZ=23003).

Network name

– enter the name of the network as coded in the

Network

parameter.

code

Cell selection

– select the network cell to which the module shall/may log in.

Off

– the cell is selected automatically.

Prefer selected

– the module tries to log in to the cell specified in the

parameter below. If unsuccessful, the module tries other available cells.

Only selected

– the module only tries to log in to the cell specified in the

parameter below.

Cell ID

– set the network cell identifier for module login.

The following options are available under the right mouse button:

Known networks

– use this option to open a dialogue with the list of known

networks and their international GSM codes. The networks are arranged
according to countries.

Visible networks

– use this option to open a dialogue with the list of visible

networks in the surroundings. By initiating the search you make your SIM card
log out temporarily from the module.

Содержание Netstar



























































































































































































































































































Результаты поиска

Содержание Netstar

Отзывы:

Бренды по названию

Популярные бренды

2N Netstar, Руководство пользователя

Результаты поиска

Содержание Netstar

Отзывы:

Бренды по названию

Популярные бренды