manualshive.com logo in svg

2N LiftIP 2.0, Руководство пользователя

Поделиться
Скачать
2N LiftIP 2.0 Скачать руководство пользователя страница 80

2N® LiftIP 2.0 User Manual

80

 /  

119

•
•

•

•

•

•

Ringtone Volume

 – 

set the incoming call ringtone volume.

Call-Progress Tone Volume

 –

 set the dialtone, ringtone and busy tone volume levels. In 

case the call progress tones are automatically generated by the PBX, this setting will not 
be applied.

Warning Tone Volume

 – 

set the volume of warning and signaling tones described in the 

Signaling of Operational Statuses section. The volume values are relative against the set 
master volume.

Suppress Warning Tones

 – the following operational statuses will not be signaled: 

Internal application started, IP address received and IP address lost.

User Sound Volume

 – 

set the volume of the user sounds to be played. The volume values 

are relative against the set master volume.

Microphone Input Gain

 – 

set the microphone input gain.

4.4.2 Input Inversion

Input Inversion enables you 

to set the input response to the pulse rising / falling edge (press / 

release the button).

Содержание LiftIP 2.0
























































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды