2N Access Unit, Руководство по настройке

Страница: 59 / 134

2N Access Unit Configuration Manual
59 / 134
•
•
5.3.7 Digital Inputs
In this configuration section set the parameters associated with the digital inputs and their
interconnections with other functions.
List of Parameters
Assigned input – define one (or none) of the logical inputs for secured state detection.
The secured state is then signalled by a red LED on the 2N Access Unit .
Input mode – set the active level of the input (polarity).
The tamper switch equipped models help detect opening of the device cover and signal this
event
as TamperSwitchActivated . The events are written into a log and read out via HTTP API
(refer to the HTTP API manual).