the 485 interface of eight external alarm
the 485 interface of sixteen external alarm
2.Connect the video line with the DVR video input.
3.Electrify the speed dome
3
3
3
3 Basic
Basic
Basic
Basic operation
operation
operation
operation
Note: The button in gray display indicates nonsupport.
3.1
3.1
3.1
3.1 Turn
Turn
Turn
Turn on
on
on
on
Plug the power supply and turn on the power supply switch. Power supply indicator light shining
indicates turning on the video recorder. After the startup you will hear a beep. The default setting of video
output is multiple-window output mode. If the startup time is within the video setting time, the timing video
recording function will start up automatically. Then the video indicator light of corresponding channel is
shining and the DVR is working normally.
Note:
Note:
Note:
Note:
1. Make sure that the input voltage corresponds with the switch of the DVR power supply.
2. Power supply demands: 220V±10% /50Hz.