84
3.
Click
Apply
to save the settings.
NOTE!
After port mapping is completed, you may access the Web client of your
NVR by entering the following information in the address bar of your
web browser: router's WAN port IP address:external HTTP port. For
example, if 10.2.2.10 is the IP address and 82 is the HTTP port, then you
enter
After Email is enabled as a triggered action (in Trigger Actions windows)
and configured properly, the NVR sends an email notification to
specified email address(es) if an alarm occurs within the time period(s)
set in the arming schedule. The email contains basic alarm information
such as alarm type, alarm time, camera ID, and camera name, etc.
Before using this function, make sure the NVR has a functional
connection to an SMTP server with which you have a valid email account.
Depending on the intended recipients, a connection to the Internet may
be required.
Only certain NVR models support this function.
1.
Click
System
>
Network
>
.
2.
Configure the related parameters. If server authentication is
required, you need to enter the correct username and password.
Click
Test
to send a test email.
