80
DDNS
If your NVR is connected to the Internet through PPPoE, the IP address
of the network changes every time it connects to the ISP server without
your awareness. This is inconvenient when you remotely access your
NVR with an IP address. To avoid this issue, you can register with an
DDNS server to obtain a domain name for your NVR and then access
your NVR by visiting the domain name instead of an IP address
(http://
DDNS server address
/
NVR's domain name
) using a web browser.
1.
Click
System
>
Network
>
DDNS
.
2.
Enable DDNS, select a DDNS type, and then complete other
settings.
If the DDNS type is
DynDNS
or
No-IP
, enter the domain name,
username and password. The domain name is the one that you
have successfully registered at a domain name registration website
(e.g., DynDNS). The username and password are those of the
account you have registered at the domain name registration
website (e.g., DynDNS).
If the DDNS type is
EZDDNS
, enter a valid domain name for your
NVR and then click
Test
to see if the domain name is available.
