82
NOTE!
A valid port number ranges from 1 to 65535, among which 21, 23,
2000, 3702 and 60000 are reserved.
An RTSP URL can be used to view live video of a channel of the
current NVR from another NVR. See
for more information.
3.
Click
Apply
to save the settings.
Port Mapping
Two port mapping methods are available:
Universal Plug and Play (UPnP)
Internal and external mapping
UPnP
UPnP enables the NVR to discover other devices on the network and
establish network services such as data sharing and communication.
To use UPnP in your NVR, you must enable UPnP in the connected router.
With UPnP enabled for Network Address Translation (NAT), the ports on
the NVR can be mapped automatically to the router, and computers can
access your NVR from outside the LAN.
1.
Click
System
>
Network
>
Port Mapping
.
2.
UPnP is enabled by default. Select the desired mapping type from
the drop-down list. To map ports manually, select
Manual
and then
set external ports for the router.
