P. 26 of 89
nanobox | razzmatazz User Manual
Oct 14, 2022
Set the Tempo
There are two ways to set the tempo: the BPM knob and Tap tempo.
1.
Open the Transports pop-up by touching the clock or holding the Right
Arrow button down.
2.
Touch the TAP button repeatedly in the desired tempo. The razzmatazz
will detect the tempo and set the value for the BPM after a few taps.
3.
Touch the BPM knob to make sure the focus ring is around it. Turn the top
knob to adjust the tempo to a specific number.
The sequence playback speed will adjust in real time if you change the tempo while
a sequence is playing.
Adjust the Swing
The Swing setting makes electronic music sound more like a live performance by
controlling the relative timing of even numbered 1/16 notes compared to the notes
on either side of them. When set to the default of 50%, the even 1/16 notes occur in
their metered place halfway between the notes on either side. When less than 50%,
the even 1/16 notes shift closer in time to the previous note. When greater than 50%,
the even 1/16 notes shift closer in time to the following note.
1.
Open the Transports pop-up by touching the
clock or holding down the Right Arrow button.
2.
Touch the Swing knob to make sure the focus
ring is around it. Turn the bottom knob to
adjust the swing.
If you have a sequence playing, you can hear the swing
changes in real time.
The Step Length for
the Sequence must
be 1/16 or smaller to
hear the effects of
the Swing setting.
