1010music Blackbox 3.0 Скачать руководство пользователя страница 28

Страница: 28 / 123

Page 28 of 123

Blackbox 3.0 User Manual

Conf Parameters

Parameter

Description

Range of Values

Mod
Target?

Launch

Mode

This controls how a note trigger

affects the playback of a pad.

Trigger

: Activate the Pad by touching the

pad or through MIDI note on. Blackbox

will start playback of the WAV file and

play through to the end.

Gate

: Begin the WAV file playback in the

same manner as Trigger mode. But in

Gate mode, playback will stop when you

release the touch or the MIDI note is

released.

Toggle

: Begin the WAV file playback in

the same manner as Trigger mode.

When another trigger event happens,

the playback will stop.

Output

Routes the audio signal for this pad to

an output jack.

Out 1, 2,

: The output of this pad is

sent to selected output in stereo.

Out1L, 1R, 2L, 2R, 3L, 3R

: The output of

this pad is sent to the left or right stereo

channel of the selected output.

Pan

For Pads routed to stereo outputs,

this controls the position of the

output in the stereo channel.

-100.0%

+100.0%

Yes

Poly Mode

Controls the maximum polyphony for

this pad. The note playback across all

pads draws from a 16 pad pool. Does

not apply to Granular pads.

Mono, Poly 2, Poly 4, Poly 6, Poly 8,

Poly X

Excl Group

Add a pad to an Exclusion Group to

prevent more than one pad in the

group from playing at the same time.

Any other pad in the same group will

stop whenever a pad in the group is

triggered.

Excl X, Excl A, Excl B, Excl C, Excl D

Choose Excl X for no exclusion grouping.

Note:

►

The PHONES output jack will always contain a mix of all of the outputs.

►

You can also control the Pan on the Mixer screen.

►

To optimize the performance of blackbox, use the lowest polyphony

required for each pad.

Содержание Blackbox 3.0




























































































































Результаты поиска

Содержание Blackbox 3.0

Отзывы:

Бренды по названию

Популярные бренды

1010music Blackbox 3.0, Руководство пользователя

Результаты поиска

Содержание Blackbox 3.0

Отзывы:

Бренды по названию

Популярные бренды