1010music BLACKBOX 1.5, Руководство пользователя

Страница: 62 / 71

BLACKBOX USER MANUAL v 1.5
5/6/2020 8:54:00 PM Copyright 1010music LLC 2020
Page 61 of 70
Configure Blackbox to Follow an External Clock
There are a few different musical clock sources that you can use with blackbox:
Name Description Priority
Clock In Blackbox gets a Clock signal from an input to the
Clock In
jack on
the back of the case. Blackbox expects a clock pulse signal with 4
pulses per quarter (PPQs), or a pulse per 16
th
note.
1
MIDI Input via USB
Device port When a MIDI signal is connected to the Device USB jack on the
back of the case, blackbox will follow MIDI Start, Stop and Clock
messages. 2
MIDI Input via MIDI TRS
In port When a MIDI signal is connected to the MIDI In TRS jack on the
back of the case, blackbox will follow MIDI Start, Stop and Clock
messages. 2
Blackbox Internal
Clock When no other clock input is provided, blackbox will use its own
internal clock. Set the BPM on the Song screen to adjust the clock
speed. 3
You can control whether blackbox responds to the USB Device MIDI input, the TRS MIDI Input, or ignores MIDI clock
on the
TOOLS
screen:
1. Push
TOOLS
and then touch
MIDI In
at the bottom of the screen.
2. Turn the knob next to the
ClockSource
parameter to select which MIDI clock source you want to use. Select
None
to ignore the clock signal on both MIDI inputs. Select
All
if you expect you will only use one clocked
MIDI input at a time, or if you just want the two clocks to fight it out.
Blackbox displays the current clock time in the top left corner of most screens in the format <measure>: <beat>. If
more than one clock input is available, the highest priority clock signal (lowest priority number) will be used.
Blackbox can adjust the timing of the playback of a clip pad to synchronize it with a specified unit of musical clock
time.
Note:
• The Clock input must use 4 pulses per quarter (PPQs), or a pulse per 16th note.
•
If
MIDI
and
CLOCK
inputs are both used, Blackbox will select the highest priority clock based on the
following order of priority: 1.)
CLOCK
Input; 2.)
MIDI
Input; 3.) Internal Clock.
• See