P. 93
nanobox | tangerine User Manual
Dec 11, 2023
Replace the WAV File in a Loaded Pad
In this procedure, you will replace a pad’s current sample by loading it from microSD card.
1.
Select the pad on the Pads Home screen.
2.
Push Right Arrow two times to open the Waveform screen.
3.
Either touch the WAV file name in the header or push Right Arrow to open the WAV
Management screen.
4.
Turn either knob to select a file or folder from the list. Touch the ^ and Load buttons
to navigate up or down the folder tree. When the file you want is selected, touch
Load to add the file to the pad. Any previous WAV file mapping is removed. You will
see the Waveform screen load the sample.
Load a Multi-sample Set
Multi-samples are banks of WAV files that are designed to be mapped to individual notes.
Some banks may have different samples for different velocities for each note. The nanobox |
tangerine comes with many multi-sample banks loaded. There are some smaller sets in the
Symplesound folder, but the most robust sets are in the Epic Sets folder.
1.
Navigate to the WAV management screen for the pad you want to load, as described
on the previous screen.
2.
Load a folder that contains a multi-sample set.
3.
Touch the File button at the bottom of the screen, then touch All in the pop-up
menu.
4.
The Working message will appear while the files are loading. This should last no
more than 20-30 seconds, even when loading large sample sets, like 1010 Grand. You
will see the Pads Home screen when the files are done loading.
Waveform
