P. 58
nanobox | tangerine User Manual
Dec 11, 2023
ADJUSTING THE LFO
When you open the Macro screen, you see an on-screen button, labeled LFO. Touch LFO to
open the tangerine’s LFO screen.
The LFO screen lets you configure a low-frequency oscillator that can serve as a
modulation source for other pad parameters. For example, you could apply LFO
modulation to the pad pitch to create a vibrato effect.
GRAPH
Updates to show
parameter changes.
PARAMETERS
Turn the top knob to
select a row, and the
bottom knob to set
the value.
MODULATION
SLOTS
Push Right Arrow with
this row selected to
set modulation
options.
PAD TRIGGER
Touch to trigger this pad. Flashes when
triggered by MIDI or Sequence.
Parameter
Description
Waveform
The shape of the wave used by the low frequency oscillator.
Saw, Rev Saw, Triangle, Pos Tri, Sine, Pos Sine, Square, Pos Square,
Random.
Rate
The frequency of the LFO from about 0.1Hz to 12 Hz.
0.0% to 100.0%
When Beat Sync is On, the value is specified in beats and measures:
8, 4, 2, 1, ½, ½ T, ¼, ¼ T, 1/8, 1/8 T, 1/16, 1/16 T, 1/32, 1/32 T, 1/64 bars
Depth
The amplitude of the oscillating wave. Set this to 0 to disable the LFO.
0 to 100%
Beat Sync
Controls the operation of the rate parameter. When On, the wave cycle is
synchronized with the clock.
On/Off
Restart
When active, the LFO will restart each time the pad is triggered.
On/Off
