1 Sound CSUB210 Скачать руководство пользователя | Manualshive

Страница: 54 / 92

background image

STACKED AND POLE-MOUNTED DEPLOYMENTS OF THE TOWER SYSTEM

Important: For permanent or semi-permanent installation of the
Tower Tube Mount on the LCC44 enclosure, the use of medium-
strength threadlocking compound is recommended on all user-
installed screws.

Figure 132. Mounting Tower Tube Mount to bottom
of LCC44

•

Using a 4 mm hex driver, tighten the two screws very firmly.

Mounting LCC44 on Active Speaker Tube using the Tower
Tube Mount

Once  the  Tower  Tube  Mount  has  been  correctly  installed  directly  on
an  LCC44  enclosure,  the  enclosure  can  then  be  very  simply  mounted
on  an  Active  Speaker  Tube,  either  atop  a  subwoofer  in  a  sub/satellite
configuration, or independently atop an Active Speaker Tube with base.

WARNING

Tipping Hazard
Improper  assembly  of  the  Active  Speaker  Tube  with
Base  or  improper  installation  of  the  Active  Speaker
Tube,  Sub  Pole  Cup,  or  Subwoofer  Outriggers  on  a
subwoofer  enclosure,  or  of  the  Tower  Tube  Mount
on  the  LCC44  could  create  a  hazardous  or  unstable
condition when the LCC44 is mounted atop them.
Follow  all  specific  instructions  for  the  assembly  of
each  of  these  products  and  verify  their  stable  and
level condition before attempting to mount a speaker
enclosure  atop  any  of  them.  DO  NOT  ATTEMPT
TO  MOVE  OR  REPOSITION  A  SUB/SATELLLITE
ASSEMBLY  OR  A  FREE-STANDING  SPEAKER
STAND WITH AN ENCLOSURE MOUNTED ATOP IT.

WARNING

Tipping Hazard
DO  NOT  USE  THE  TOWER  RIGGING  SYSTEM
PLATES  TOGETHER  WITH  THE  TOWER  TUBE
MOUNT AND SPEAKER TUBES FOR SUBWOOFER/
SATELLITE  CONFIGURATIONS  ATOP  THE  SUB12
OR  CSUB210  MODELS  OR  WITH  THE  ACTIVE
SPEAKER TUBE WITH BASE.
The use of pole mounted configurations of the LCC44
model  enclosure  with  the  inclinable  Tower  Rigging
System plates is possible only atop the CSUB610 or
SUB310 model subwoofers.

•

Make sure that the 95 cm Active Speaker Tube is properly
installed in the CSUB610 or SUB310 (either model equipped
with Outriggers and properly leveled and positioned for use) or
that the free-standing 175 cm Active Speaker Tube and Base
is safely positioned. Then simply lift the LCC44 with the Tower
Tube Mount above the Active Speaker Tube and align it in the
desired direction. Though not obligatory, this will generally be
with the rear of the LCC44 towards the rear of the subwoofer,
where the connectors are located.

«
...
52
53
54
55
56
...
»

Содержание CSUB210





























































































Отзывы:

Нет отзывов

Похожие инструкции для CSUB210

Бренд: Panasonic Страницы: 132

Бренд: Panasonic Страницы: 10

Бренд: AARU ENGINEERS Страницы: 4

Бренд: Danfoss Страницы: 28

Бренд: M-LOCKS Страницы: 8

Бренд: U-Prox Страницы: 3

Бренд: dallmeier Страницы: 2

Бренд: Q-Logic Страницы: 3

Бренд: Concertone Страницы: 12

Бренд: STAYER WELDING Страницы: 56

Pure Club 15 with DSP

Бренд: DAPAudio Страницы: 24

Бренд: Westweld Страницы: 82

THX Select Series

Бренд: SensaSound Страницы: 14

Бренд: Aiphone Страницы: 2

Бренд: Jobsite Страницы: 8

Бренд: Logitech Страницы: 200

Picomig 305 D2 puls

Бренд: EWM Страницы: 84

Бренд: Pix Controller Страницы: 21

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды