CommScope FOSC-450-BS, Инструкция по установке

1

FOSC-450-BS

I N S T A L L A T I O N   I N S T R U C T I O N

Fiber Optic Splice Closure

1 Introduction

2 General

2.1 Abbreviations

2.2 Kit content Unit

2.3 Tools

2.4 Accessories

3  Installation of the closure

4  Cable installation

4.1 Looped cable preparation

4.2 Drop cable preparation

4.3 Cable + strength member termination

for drop and looped cable

4.4 Installation of the closure

5  Installation of the gel block

6  Fiber routing to individual trays

7.1 Fibers routing to the trays (looped cable and track)

7.2 Fibers routing on the trays

7  Shield continuity

8  Closing the closure

9  Important steps 

Content

1   Introduction

The FOSC-450 is an environmentally sealed enclosure for the fiber management system that provides the function 
of splicing in the external network.
The FOSC-450 has provision for all cable terminations and sealing requirements.
The closure is a single ended design made of a thermoplastic material. The base and dome are sealed with a 
clamp, pre installed Gel-O-ring system. For cable sealing, a wrap-around block with 6 ports is used that contains 
a pre-installed gel profile. One can terminate 6 cables, with a diameter of minimum 9 mm and maximum 25 mm.
It can be opened and closed repeatedly without the need to replace the gel.

TC-642-IP
Rev A, Feb 2017
www.commscope.com