DSL
PHONE1 PHONE2
Quick Start Guide
VMG8823-BX0B
Dual-Band Wireless AC/N VDSL2
VoIP Combo WAN IAD
ENGLISH
Use the gray phone cable to connect the DSL port to a
DSL splitter (1-a) or directly to the telephone wall outlet.
OR
Use an Ethernet cable to connect the WAN port to a
gateway modem (1-b).
INTERNET LED (5-a)
OFF - The Internet connection is not ready. GO to Internet
Setup.
PHONE LED (5-b)
OFF - The VoIP registration is not complete. Configure VoIP
settings.
EN
1
Connect a phone to the phone port using the phone cable.
Connect a computer to the LAN port using the yellow
Ethernet cable.
Connect the power cable to the modem and press the power
button.
EN
2
3
4
EN
5
LAN
PHONE1
POWER
POWER
ON
3
4
Hardware Connections
1
Check the LEDs
5
OR
2
1/2
INTERNET
OFF
PHONE1
OFF
The VoIP registration is complete.
The Internet connection is ready.
5-a
5-b
INTERNET
ON
PHONE1
ON
WAN
1-b
DSL
PHONE1 PHONE2
DSL
1-a
DSL
PHONE1 PHONE2
Place your hand no more than 10 CM over the Zyxel Logo for
active LEDs to light up for 30 seconds (after you move your hand
away).
Active LEDs are lit.
Proximity Sensor
All LEDs are turned off except power LED.
On for 30 seconds
