E.MAINTENANCE
For best results and long term operation, regular maintenance is
essential.
To ensure the cooler delivers fresh and clean air, regularly change the water when
dirty, and clean both the dust filter and the cooling pad.
a. Remove the filter pad by unscrewing the 4 screws on the rear of the cooler. Then lift the
pad and pull out at the bottom to release. To replace the pad, slide up into the slot under
the top of the cooler, push in at the bottom, and allow to drop into the lower slot.
b. Clean the pad from the inner-side to out-side of pad inner side is towards motor). Never
use any liquid detergent. Never use pressurized water, as it may cause damage to the
pad.
c. Unscrew the drainage lid to let dirty water flow out, then clean the water tank. Wash off
dirt on the water sensor, water pump and the float valve. Rinse thoroughly.
d. Use mild soap and soft clean cloth when cleaning the cooler casing. Do not use any
caustic chemical detergent that may cause damage to the surface of the cooler.
e. To prevent buildup of algae and biological organisms in the reservoir, regularly add
chlorine /bromine tables as per tablet manufacturer recommendation for evaporative
cooler reservoirs.
PORTABLE AIR COOLER
OPERATION INSTRUCTION
A. KEY COMPONENTS
