OP
ER
AT
ING
IN
STRUCTION
S
Aluminum
*
KW013A250 / KW013B250
0,25 L
Stainless Steel
*
KW027500
0,5 L
*
KW0271000
1,0 L
IMPORTANT INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
Cream whippers work with pressurized gas and therefore there is a
need to take special safety precautions
– Never use a damaged cream whipper; if a cream whipper drops to
the floor, it must be checked by us before using it again.
– Cream whipper and creamer chargers are to be stored out of reach
of children.
– Do not lean above the cream whipper when you screw in the
charger.
– The head of the cream whipper screws easily onto the bottle's
threading. Never ever use force to screw the
head on. Do
not
cross-thread.
– This cream whipper has a valve which prevents overpressurization.
It is located inside the metal piercing
section
. Do not tamper
with
this assembly or attempt any adjustments as this would
end the
guarantee and our liability.
– Keep these operating instructions – they help you to work the
cream whipper correctly.
– Use this cream whipper only for the purpose indicated in these
operating instructions.
WARNING
Only screw
ZOEMO
cream whipper heads on
ZOEMO
bottles.
The
head as well as the
canister
are
compatible only to the same
model No
. Usage of other
than
ZOEMO
components or
ZOEMO
spare parts may result in mal-function causing serious injury.
PARTS
Cream Whipper
– Creamer chargers are to be handled according to the safety
instructions on the package of the chargers.
– Empty chargers are to be removed from the cream whipper head
with the charger holder.
– Use
8-gram N2O
one-way chargers only!
– Keep the cream whipper out of sun and away from heat.
– Store the cream whipper only in the refrigerator – never in the
freezer compartment or the deep-freezer.
– Do not remove the head of the cream whipper as long as there is
pressure inside the
canister
(Operating instructions, p
icture
7).
Always
operate the lever and release the pressure first.
– Do not change anything on the cream whipper or its safety
devices.
– Only original spare parts have to be used. When you need
some
parts, please contact us
.
– Clean only by rinsing. Do not use sharp-edged objects. To take the
cream whipper apart, only remove the parts shown on the drawing
on page
3
. If the cream whipper has been out of use for a rather
long time, clean with water as above.
Nozzle Holder
Decorating
Nozzle
Charger Holder
Metal Head Complete
Cap for
Piercing
Section
Cap Gasket
Piston
Use only
8-gram N2O
one way chargers.
Here's some of the brands :
*
KW013A500 / KW013B500
0,
5
L
*
KW013A1000
/ KW013B1000 1,0
L
Canister
