background image

StudSensor

i

65 OneStep

Multifunction Stud Finder

Congratulations on purchasing one of the most technologically
advanced stud finders ever created! Zircon introduced the
StudSensor

in 1980 and has put over 25 years of research into 

developing OneStep

, the advanced technology at the core of

StudSensor

i

65. OneStep technology senses, processes, and adapts 

to wall surfaces to provide visibility into walls, floors, and ceilings.
StudSensor

i

65 is one of the fastest, most accurate, and 

easiest-to-use stud finders on the market today.

REGISTER YOUR PRODUCT TO WIN!

Register your product today and be automatically entered in our monthly drawings 
to win free Zircon products. To quickly and easily register your Zircon product, please
visit www.zircon.com

SpotLite

®

Pointing System

Signal Strength
Indicator

LCD Display

Battery (back of unit)

Edge or Center
Indication

Recalibration
Indication

AC WireWarning

Indication

Stud Scan Mode
Indication

Running Board

Power Button

1. OPERATING TIPS

5. SCANNING DIFFERENT SURFACES

2. FINDING A STUD

4. AC WIREWARNING

3. MARKING THE LOCATION

LIMITED 1 YEAR WARRANTY

Zircon Corporation, (“Zircon”) warrants this product to 
be free from defects in materials and workmanship for
one year from the date of purchase. Any in-warranty
defective product returned to Zircon*, freight prepaid
with proof of purchase date and $5.00 to cover postage
and handling, will be repaired or replaced at Zircon’s
option. This warranty is limited to the electronic circuitry
and original case of the product and specifically excludes
damage caused by abuse, unreasonable use or neglect.
This warranty is in lieu of all other warranties, express 
or implied, and no other representations or claims of 
any nature shall bind or obligate Zircon. Any implied 
warranties applicable to this product are limited to the
one year period following its purchase. IN NO EVENT
WILL ZIRCON BE LIABLE FOR ANY SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM 
POSSESSION, USE OR MALFUNCTION OF THIS PRODUCT.

In accordance with government regulations, you are
advised that: (i) some states do not allow limitations on
how long an implied warranty lasts and/or the exclusion
or limitation of incidental or consequential damages,
so the above limitations and/or exclusions may not apply

to you, and further (ii) this warranty gives you specific
legal rights and you may also have other rights which
vary from state to state.

Return product freight prepaid with proof of purchase
date (dated sales receipt) and $5.00 to cover postage 
and handling, to:

Zircon Corporation
*Attn: Returns Department
1600 Dell Avenue, Unit K
Campbell, CA 95008-6992 USA

Be sure to include your name and return address. Out of
warranty service and repair, where proof of purchase 
is not provided, shall be returned with repairs charged
C.O.D. Allow 4 to 6 weeks for delivery.

Customer Service, 1-800-245-9265 or 1-408-963-4550
Monday–Friday, 8:00 a.m. to 5:00 p.m. PST
E-mail: [email protected]

U.S. Patents 6259241, 6291970, Canada Patents
2341385, 2353156, Japan Patent 3581851,
and Patents Pending
©2005 Zircon Corporation • P/N 60921 • Rev A 09/05

FCC Part 15 Class B Registration Warning

This equipment has been tested and found to comply with the limits for a Class B 
digital device, pursuant to Part 15 of FCC Rules.

Hold the tool straight up and down, parallel
to the stud. Do not rotate the tool.

Keep tool flat against the wall and do not
rock or tilt the tool when scanning.

Wallpaper:

The StudSensor 

i

65 functions normally on walls covered with

wallpaper or fabric, unless the materials are metallic foil, contain metallic
fibers, or are still wet after application.

Note: Sensing depth and accuracy can vary due to moisture, content of 
materials, wall texture, and paint.

Textured walls, acoustic ceilings, or uneven
surfaces:

Place thin cardboard on the surface to

be scanned. Calibrate with the cardboard in place,
then begin scanning.

Wood flooring, subflooring, or gypsum 
over plywood sheathing:

Auto Depth Sensing

automatically corrects for target depth in both 
normal and high sensitivity modes

Once an object is located,
mark the location where
the SpotLite illuminates.

Zircon’s AC WireWarning feature works continuously.
When AC voltage is detected, the AC Alert warning
icon will illuminate.

Always start with the scanner placed against the wall, then
press the power button. Wait for beep to confirm calibration
has completed before moving tool.

Slowly slide tool across surface. EDGE 
display will illuminate, indicating 
location of the stud edge.

Continue sliding tool. When the 
center of stud is located with three 
bars on the Signal Strength Indicator,
the buzzer will sound, and the four 
middle bars, CENTER display, and 
SpotLite will illuminate.

In cases of deeper studs (or thicker 
walls) two bars will show on the 
Signal Strength Indicator and only 
the SpotLite and four middle bars will 
illuminate. If you still can’t locate a 
stud, try the next step.

Quickly (within one second) release and 
re-press the power button. The scanner 
will enter the 

High Sensitivity Mode

and the Stud Scan Mode Indication will 
flash continuously. The center of a very 
deep stud will be indicated by the four 
middle bars illuminating.

Reviews:

Related manuals for StudSensor OneStep i65