![background image](http://html2.mh-extra.com/html/ziehl/tr-800-web/tr-800-web_quick-manual_3716889001.webp)
ZIEHL industrie
– elektronik GmbH + Co KG
Daimlerstr.13, 74523 Schwäbisch Hall, Germany
+ 49 791 504-0, [email protected], www.ziehl.de
Quick Guide TR800Web
updated: 2016-10-06/Fz
from Firmware: 2.0.3
Hardware Version -HW1
TR800Web
12280-0755-01
Seite
1 / 8
www.ziehl.de
- Universal Relay
Detailed operating manual see:
http://www.ziehl.com/de/produkte/?view=detail&detail=38
1
Display and controls
1, 2 LEDs (yellow) RS485 interface
Rx flashes briefly:
Unit is receiving data via the RS485 interface
Tx flashes briefly:
Unit is transmitting data via the RS485 interface
Rx and Tx flash/illuminate during firmware update
3
LED (red) Sensor error
Illuminated:
Fault in a sensor circuit
4
LEDs (red) alarm
Illuminated:
Alarm (1-4) has occurred
Flashes briefly (1:4):
Response delay is running
Flashes long (4:1):
Backshift delay is running
Flashes uniformly (1:1): Ready for reset, reset with key
Press "SET/RESET" ≥ 2s or ext. Reset Y1/Y2
5
LED (yellow) Night
Illuminated: Limits for "Night" (can be set via browser) are active
6
LEDs (yellow) sensors
Illuminated:
Displays the sensor value belonging to the LED in the digital display
Flashes:
Sensor error in the corresponding sensor circuit
7
LEDs (yellow) relay state
Illuminated:
The relay belonging to the LED is picked up
Off:
The relay belonging to the LED is released
8
Digital display (4 digits)
Display of sensor value, error codes
Display of menu and configuration mode
9, 10 Up button / Down button
Change into the menu mode (see Operating instructions Point 8.3)
11
Set/Reset button
Press briefly:
Displays the next sensor (sensor LED illuminates)
Press for 10 s:
Displays the software version (e.g.
0-00)
12
LED (yellow) Displays Ethernet transmission speed
Off: 10 Mbps
On: 100 Mbps
13
LED (green) Displays Ethernet data traffic
Flashes during active data transmission