background image

Operating Instruction Manual

G A S   C O O K E R

R

M  O  D  E  L  S

KTM6002P79L

5 Feb 2020 

Thank you for buying a 

Zenne

 product.

•   Please read this instruction manual 

     carefully before operating the gas 

     cooker and kindly keep it for future 

     reference.

•  Complete the warranty card with date of purchase, or   
       dealer’s receipt and other required information.
•  If you find any anomalies with the gas cooker, please 
 

contact our dealer as soon as possible.

•  All installation and repair services must be carried 
       out by our installation and service team.

ATTENTION

•  KGC11A

•  KGC11C

•  KGC12A

•   KGC12C

•   KGC16A

•   KGC16C

•   SS19

KGC

•  KTC18S

KTC

•  GST211

GST

•   KGS101B

•   KGS101C

•   KGS201C

•   KGS204A

•   KGS205S

•   KGS208C

•   KGS208M

•   KGS209VS

•   KGS301A

•   KGS301C

•   SS309

•   KGS401A

•   KGS401C

•   KGS501C

•   KGS512S

KGS

•  KTM701S

•  KTM401S

KTM

•  KLS216V

•  KLS206V

KLS

•   KGT301B

•   KGT301B-SS

•   KGT401B

•   KGT501B

KGT

KDi

•   KDi106

•   KDi106C

•   KDi106D

•   KDi201C

•   KDi201D

Please Read Before USE

Do not use a high pressure 

regulator.

  It may cause back-fires,

internal fires and explosions.

When 

using L.P Gas, the gas cylinder 

must be fixed with a reliable gas 

regulator.  We strongly recommend 

Zenne regulators 

(

ZR2017BT & 

ZR2018BB

 - 

ONLY available in 

Malaysia)

.

The high pressure relief hole on the 

top of the gas regulators 

must not 

be clogged.  Otherwise, there would 

be high pressure occurrence on the 

gas cooker.  This may result  in big 

flame  or fire may happen.                                                          

HIGH PRESSURE

Regulator

EXCEEDED

3.3 kPa (33mbar)

Outlet

Pressure

2.0kPa ~ 3.3 kPa

(20mbar ~ 33mbar)

Outlet

Pressure

LOW PRESSURE

Regulator

ZR2017BT

 High 

Pressure

Relief

hole

ZR2018BB

For Stainless Steel Top

( with blue plastic  protector  sheet )

Please 

remove

the

plastic 

sheet 

before

use.

Stainless

Steel Top

A layer of grease exists

in between the blue plastic

protector sheet and the

stainless steel top.  It can be

removed by wiping with a 

piece of wet cloth.

Blue

Plastic

Protector

Sheet

Summary of Contents for KGS Series

















Reviews: