Factory default settings allow ZeeVee modulators to broadcast up to four HD
sources on RF channels 2, 3, 5 and 6 for reception at connected HDTVs.
1. Connect the power supply and apply AC power.
2. Using the A/V cable, connect the mini-DIN connector to the A/V Output
on your H25 Receiver.
3. Connect the Composite Video connector on the A/V cable to the Video
Out port for closed captions only.
4. Connect the RF Output to your
RF network.
Default output power can be
changed using Maestro, the web-based configuration utility.
NOTE: Default output power of HDbridge2000 is +45dBmV. Do not
connect directly to TV or you may damage the TV.
5. Set the RF input on the TV to Cable Mode (not Air or Antenna).
6. Tune HDTVs to cable channels
(see Table 1).
NOTE: Many TVs require a full
channel scan to find the channels.
H25 A/V
cables are included with this
product for use with DirecTV H25 receivers.
Standard Hydra A/V cables and VGA-DIN
cables for use with other video sources
can be purchased separately from your
distributor.
Table 1
AV Input
RF #
HDTV
Channel
AV Input 1
2
2.1
AV Input 2
3
3.1
AV Input 3
5
5.1
AV Input 4
6
6.1
Basic Installation
ZeeVee Quick Start Guide
Welcome to ZeeVee!
All ZeeVee products convert your video source to a digital
cable channel and broadcast it over coax to all your HDTVs.
This guide walks you through basic setup for ZeeVee HD
modulators approved for use with the DIRECTV H25 Receiver.
If you run into any problems during installation, feel free to
contact Tech Support at +1 (877) 4-ZEEVEE (1.877.493.3833).
R e c e i v e R - l e s s H D
Back of H25 Receiver
A/V cable
RF Output
+45 dBMV
AC Power
Back of HDb2540
+
H25 ReceiveRs
Closed Caption
only
What’s in the box:
ZeeVee Modulator
AC Power Cord
Quick Start Guide
H25 Audio/Video Cables x4
HDb2540
Model Number
Name and description of the unit.
Color Display
Displays configuration and system status.
Coax Output
HDbridge 2000 Default
+45dBmV Power - do
not connect directly to
HDTVs.
Up to 2 paired, frequency-agile QAM RF
CATV output channels for up to 4 video
sources.
Output power can be set b25 to
+45 dBmV using the front panel or the
Maestro web interface.
Audio/Video Inputs
for up to 4 sources
Video: Component
Closed Captioning: Composite
Audio: Digital, Analog
10/100 LAN Port
Configuration and remote management
10/100 LAN Port
For simplified wiring and deployment
A/C Power Input
100-240VAC / 50-60Hz
H25 A/V Cable
DIN Connector to ZeeVee
Mini-DIN Connector to
DirecTV
Composite Video Connector
for Closed Captions only
H25 A/V
cables are included with this product for use with DirecTV H25 receivers.
Standard Hydra AV cables and VGA-DIN cables for use with other video sources can
be purchased separately from your distributor.
www.zeevee.com
www.zeevee.com
