ZANUSSI
P R O F E S S I O N A L
RECTANGULAR BOILING PANS
N 900
Model 200283
WATER ADDITIVE AGAINST CORROSION
1
1
1
INCLUDED ACCESSORIES
Supply voltage
230 V, 1N, 50/60 400 V, 3N, 50/60 400 V, 3N, 50/60
Net weight - kg.
180
222
200
installed-electric
0.05
0.05
24
gas
29
35
Power - kW
Heating type
Indirect
Indirect
Indirect
depth
550
550
550
width
740
1040
1040
height
485
485
485
Vessel dimensions - mm
Net vessel useful capacity - Lt.
180
240
240
height adjustment
50
50
50
height
850
850
850
depth
900
900
900
width
900
1200
1200
External dimensions - mm
Power supply
Gas
Gas
Electric
NPGI918
200282
NPGI1225
200283
NPEI1225
200284
CHARACTERISTICS
MODELS
TECHNICAL DATA
RANGE
COMPOSITION
N 900: a range of over 150 models for the
professional caterer designed to guarantee
the highest level of performance, reliability,
energy saving, safety standards and
ergonomic operation. These concepts are
reflected in the total modularity of the range
that ensures innumerable configurations,
either free-standing, bridged or cantilever.
N900 demonstrates how advanced
technology can satisfy the needs of the
professional caterer.
The models detailed on this sheet are 2
free-standing rectangular boiling pans with
indirect heating (jacketed): 2 gas and 1
electric.
FUNCTIONAL AND
CONSTRUCTION
FEATURES
�
Burners in stainless steel with optimized
combustion, flame failure device and
protected pilot light (gas models).
�
Incoloy armoured elements endowed with
safety thermostat positioned in the jacket
cavity base (electric models).
�
Safety thermostat.
�
Great reduction of energy consumption
thanks to a pressure switch controls
monitoring energy and water consumption
simplifiing use and eliminating the need for
continuous water refilling.
�
Front and side panels in stainless steel
with Scotch Brite finish.
�
All models have right-angled side edges to
allow flush-fitting joins between units,
eliminating gaps and possible dirt traps.
�
Main connections can be via the base of
the unit.
�
All models provided with service duct to
facilitate installation.
�
Feet in stainless steel 50 mm adjustables
in height.
�
All gas appliances are supplied for use
with natural gas, with LPG conversion jets
supplied as standard.
�
Hot and cold water refilling through an
electrovalve.Water drain through a 2"
stainless steel tap with athermic handle.
�
The special design of the control knob
system guarantees against water infiltration.
�
All models incorporate fixing points for the
bridging system
�
IPX5 water protection.
* In accordance with
H
regulations for gas models
belonging to class B11 (power over 14kW), it is
necessary to install a chimney (if installed under a
hood) or chimney and draft diverter if the waste gases
are vented directly outside.
