background image

29

IMPORTANT

This new appliance is easy to use, however, to
obtain the best results, it is important to read this
booklet and to follow all the instructions before
using it for the first time.
The booklet contains the necessary information
regarding installation, use and maintenance, as
well as giving useful advice.

THE GUARANTEE

Your new cooker is covered by guarantee.
You will find the guarantee certificate enclosed. If you
are missing anything contact your retailer, giving the
date of purchase, model, and the registration number
which is printed on the identification plate.
We ask you to bear in mind that for the guarantee to
be operated, it is necessary to fill in and send the larger
part of the guarantee to Zanussi Technical Assistance
& Service within 8 days of purchase, so that we can
provide registration.
We advise you that the smaller part of the certificate,
as well as your receipt and proof of purchase, should
be shown when required to personnel of Zanussi
Technical Assistance & Service.
Without following this procedure, the repair personnel
will have to charge you more for the repair.

These instructions are only valid for those countries whose identication symbols are shown

on the cover of the instruction brochure and on the appliance itself.

This appliance complies with the following E.E.C. Directives:
• 73/23 - 90/683 (Low Voltage Directive);
• 89/336 (Electromagnetical Compatibility Directive);
• 90/396 (Gas Appliance Directive);
• 93/68  (General Directives);
and subsequent modifications.

MANUFACTURER:

ELECTROLUX ZANUSSI ELETTRODOMESTICI S.p.A.
Viale Bologna 298
47100 FORLÌ (Italy)

Appliance      Class 1 and      Class 2      Sub-Class 1

Category:

II

 2H3+

Voltage tension:

230 V ~ 50 Hz

Summary of Contents for GAS AND ELECTROGAS COOKERS




























Reviews: